The construction of runway, taxiway and apron at H.Dh. Kulhudhuffushi Airport was awarded to MTCC by Regional Airports. The project which commenced on 12th February, 2018 was completed on 9th November 2018.
Below are some technical details regarding the project.
Base course 100mm thickbase course 100mm thick
Runway, turning pads, apron, taxiways including 250 mm wide edge protection as shown in the drawing (refer to the specification) sqm 45,307.00
Dredging / excavation of any material for the new harbour basin, maximum specified depth -3m msl runway, turning pads, apron and taxiways, sqm 45,307.00
Service roads sqm 4,011.00
Fire access road sqm 1,431.00
Compaction
Runway, turning pads, apron and taxiways, sqm 45,307.00
Service roads sqm 4,011.00
Fire access road sqm 1,431.00
Markings & signs
Runway, turning pads, apron and taxiways, sqm 1,929.65
Allow for painting on road markings as required sqm 45.61k
Runway, turning pads, apron, taxiways including 250 mm wide edge protection as shown in the drawing (refer to the specification) sqm 45,307.00
Service roads at air & land side in front of terminal with parking area sqm 4,011.00
Fire access road sqm 1,431.00
Prime coat
Runway, turning pads, apron and taxiways, sqm 45,307.00
Service roads sqm 4,011.00
Fire access road sqm 1,431.00
Wearing course 75 mm thick
Runway, turning pads, apron and taxiways, sqm 45,307.00
Service roads sqm 4,011.00
Fire access road sqm 1,431.00
Compaction
Runway, turning pads, apron and taxiways, sqm 45,307.00
Service roads sqm 4,011.00
Fire access road sqm 1,431.00
Markings & signs
Runway, turning pads, apron and taxiways, sqm 1,929.65
